Construction of the Swimming Pool

Construction of the Swimming Pool

swimming pool contractor in the field of construction service services pools, pool installation services provider, service swimming pools, swimming pool care, the renovation of a swimming pool, and a pool. affordable rates in accordance with your budget, quick process with professional service. supported by a staff of experts in bidangya

POOL PLUMBING SYSTEM
in designing plumbing systems swimming pools require a mature calculations so that the water circulation system achieved the pool is good and efficiency

POOL PLUMBING SYSTEM CONSISTS OF
-Plumbing line inlet (the water from the pump goes into the pool through the nozzel inlet)
-Plumbing lines is vacuum drawn (to suck up any dirt on the surface of ceramic swimming pool)
Plumbing-skimmer (water from the skimmer box at the suction pump toward the swimming pool)
-Plumbing line overflow (water from the gutter flow toward balancing the gravity tank)
-maindrain line pipeline (water from the bottom of the/lantai pond in suction towards the pool pump)
-Plumbing lines back wash (water sewer pipe on the filter when washing the pool)

on the installation type memakasi swimming pool plumbing pvc pipe with standardclass AW 10 kg/cm2

HOW TO INSTALLATION OF PVC PIPE IN THE POOL PLUMBING SYSTEM
the surface of the pipe to be the glue must be in a clean and dry
-the surface of the pipe and the fitting to be the glue in advance at kerik with sawsor in the rough with sandpaper sandpaper so that it can be fused with lemya pipe so it can add strong glueing and hard pressed to release the connection, and certainly will not leak
-Once the surface of pipes and fittings in the kerik/in kasarkan then in the apply glue pvcnya glue granting better with large quantities never too thin, gunaya so that permukaanya becomes slick and certainly reduce the risk of leakage
-at the time of the unification of the surface of the pipe and fittings that have grease glue, use tools towing or pulley so that the pipe goes into the fitting to the maximum, hold the first few minutes to avoid flipping, for pipe diameter 3.3″ and under do not need to wear a towing/pulley tool, simply in the press with the hand alone

HOW TO DETERMINE THE AMOUNT OF THE POOL INLET NOZZEL
Some point the inlet at the nozzel may need at a swimming pool:
the capacity of a set of inlet nozzel ranges between 5-7 m3/hour, then require two sets of nozzel inlet in one pool

such an explanation of the dwarf in the dwarf-installation the installation of the pool …
If you need the services of installation the installation of the pool pipes entrust to the expert WORK of the pembuatan kolam renang ready to help you tackle all problems on your pool.
For more info contact our phone no call …. thanks

Leave a Reply